If you’ve ever tried to charge your phone in the rain, you know the pain of water getting into your charging port. Here’s a quick and easy way to get water out of charging port without damaging your phone.
Table of Contents
Why does water get into my charging port?
Water getting into your charging port is a very common problem for most people. There are a few things that can cause this to happen. The first thing is if you have your phone in your pocket and you are sweating, the water from your sweat can get into the charging port. Another thing that can cause this is if you are out in the rain and your phone is in your pocket, the rain water can also get into the charging port. The last thing that can cause this is if you are at the beach or pool and your phone is in your bathing suit, the water can also get into the charging port.
There are a few things that you can do to prevent this from happening. The first thing is to make sure that you wipe down your phone with a microfiber cloth after you sweating or being in the rain. The second thing is to avoid taking your phone to the beach or pool with you. If you must take it with you, make sure that you put it in a waterproof case. The last thing is to try not to put your phone in your pocket all the time. If you do have to put it in your pocket, make sure that you put it in a case that has a good seal on it so that no water can get into it.
What are the consequences of water in my charging port?
The consequences of water in your charging port are that it can lead to rust, corrosion, and electrical problems. Water can also cause your charging port to short circuit.
How to get water out of charging port
If your device has a built-in or detachable water-resistant seal, make sure it is properly secured before connecting the charging port. If water gets into the charging port, it could damage your device.
To get water out of charging port, follow these steps:
- Disconnect the charging cable from your device.
- Use a small, dry brush to lightly brush away any debris from the charging port.
- Use a can of compressed air to blow away any remaining water droplets from the charging port.
- Inspect the charging port for any visible damage. If there is damage, do not continue using the charging port and seek repairs from an authorized service provider.
Tips to prevent water from getting into your charging port
Here are some tips to get water out of charging port:
- Avoid using your device in or near water.
- Do not charge your device while it is wet.
- If your device does get wet, do not attempt to charge it until it is completely dry.
- Consider investing in a waterproof case or cover for your device.
What to do if your phone gets wet
If you want to get water out of your phone, the first thing you should do is turn it off. Then, remove the SIM card, battery (if possible), and any other removable accessories. Next, use a dry, absorbent cloth to wipe down the phone as much as possible.
If you have access to a vacuum cleaner with a small attachment, you can try to vacuum out any remaining water. Alternatively, you can blow into the charging port (being careful not to blow too forcefully and damage the phone). Finally, soak up any remaining moisture with a dry cloth or paper towel.
Once the phone is as dry as possible, put the back cover on (if applicable) and leave it to air dry for 24-48 hours before turning it on again. If possible, avoid using it during this time so that the water has a chance to fully evaporate.
How to dry out your phone if it gets wet
If your phone gets wet, the first thing you should do is turn it off. Once it’s powered down, remove the SIM card and any external memory if possible. These can all short out if left in the water too long.
Next, take a look at the charging port. If water is visible inside, use a small piece of soft cloth to wipe it away gently or if the port is very wet, blow into it a few times to help speed up the drying process.
If your phone has a removable battery, take it out and dry it off as best you can before putting it back in. Once everything is dry, or as dry as possible, put your phone back together and try turning it on.
If it doesn’t turn on right away, don’t panic. Leave your phone powered off and give it a chance to dry out for a few hours before trying again. In most cases, this will be enough to fix the problem and your phone will work as usual once it’s dried out completely
How to clean your phone’s charging port
Your phone’s charging port is one of the most important components of your device, and it’s also one of the most susceptible to damage. Lint, dust, and other debris can easily accumulate in the charging port and cause problems with connectivity. If your phone isn’t charging properly, or if you notice that the charging port is cracked or damaged, it’s important to clean it out as soon as possible.
There are a few different ways to clean your phone’s charging port, but the easiest way is to use a can of compressed air. Simply hold the can about an inch away from the charging port and spray for about 30 seconds. The compressed air will dislodge any lint or dust that may be trapped in the port.
If you don’t have a can of compressed air handy, you can also use a cotton swab to clean out your phone’s charging port. Dip the cotton swab in rubbing alcohol and then gently insert it into the charging port. Gently move the cotton swab around to remove any debris that may be present. Finally, use a dry cotton swab to remove any residual alcohol from the charging port.
It’s also a good idea to avoid using generic chargers or chargers that are not specifically designed for your phone. Generic chargers can sometimes cause damage to your phone’s charging port, so it’s always best to use a charger that is made by your phone’s manufacturer.
When to take your phone to a professional
Your best bet is to take your phone to a professional as soon as possible. While it is possible to get water out of charging port yourself, it is very difficult to do so without damaging your phone. A professional will have the tools and experience necessary to safely get water out of charging port and from your phone and ensure that it is still working properly.
How to protect your phone from water damage
In order to fix water damage on a phone, you should take a few simple steps:
- Avoid using your phone in the rain or near water.
- If your phone does get wet, dry it off immediately with a towel or other absorbent material.
- Don’t try to charge a wet phone.
- If your phone is submerged in water, take it out as soon as possible and remove the battery if possible.
- Once you have removed the battery, place the phone in a dry, airtight container filled with rice. This will help absorb any moisture that is still inside the phone.
- Leave the phone in the rice for 24-48 hours before turning it on again.
What to do if your phone has water damage
If you’ve ever dropped your phone in water, you know the sinking feeling of watching it float away. But all is not lost. Follow these steps and you might be able to save your precious device.
First, turn off your device if it’s still on. Continuing to try to use a wet phone can short out the circuitry.
Then, take out the SIM card and any other removable parts. Water can corrode these components.
Next, dry off the phone with a towel or a blow dryer set to low heat. If you have rice, don’t hesitate to pull it out of the pantry and use it as a drying agent: Just put your phone in a bowl or container of dry rice overnight (make sure the container is airtight). The rice will help absorb any moisture inside the phone.
If you don’t have rice on hand, try using silica gel packets—you know, those pesky little things that often come bundled with new shoes or electronic devices. Just like rice, they can help absorb water from your wet phone overnight.
Once you’ve dried off your device as much as possible, put the battery back in (if it’s removable) and turn on your phone. If it powers on, Hurray! If not, try charging it for a few minutes before turning it on again.
