If you’re like most people, you’ve probably dropped your phone in water at least once. And if you’re like most people, you probably freaked out when it happened. But don’t worry, there are a few things you can do to get the water out of your phone and hopefully save it from ruin.
How to get water out of your phone
If your phone has been exposed to water, it’s important to act fast to try and prevent any damage. Here’s what you need to do:
- Turn off your phone.
- Remove the SIM card and any other external removable parts.
- Dry your phone off with a lint-free cloth or, if possible, a vacuum cleaner with the hose attachment.
- If you can, place your phone in a container of uncooked rice or silica gel packets (you can find these in shoe boxes or electronics stores). This will help absorb any moisture that’s still inside your phone.
- Let your phone sit in the rice or silica gel for 24-48 hours before turning it on again.
After taking these steps, hopefully your phone will be working again as good as new!
How to get water out of your phone speaker
If water got into your phone’s speaker, you might be able to fix it yourself. First, power off your phone and remove the battery (if possible). Next, use a vacuum cleaner with the hose attachment to try and suck out any water. If that doesn’t work, blow into the speaker while it’s turned off. Finally, shake your phone vigorously to get rid of any remaining water. If all of these fail, you’ll likely need to take your phone to a professional to have it repaired.
How to get water out of your phone without rice
If you’ve ever dropped your phone in water, you know the panic that sets in when you see it sitting in a puddle. But there’s no need to call your insurance company just yet — there are a few things you can do to try and save your soggy device.
First, if your phone is still on, turn it off immediately. This will help prevent any short circuits that could happen when the water and electricity meet.
Next, take out the battery, SIM card, and anything else that’s removable (like a SD card). These should all be placed in a dry place so they don’t get damaged.
Now it’s time to dry off the phone as much as possible. You can use a cloth or a vacuum cleaner with the nozzle attachment to suck up any moisture from the outside of the phone.
Once the phone is dry on the outside, it’s time to deal with the water on the inside. The most popular method is to put your phone (and anything else that was in your pockets like your keys or wallet) into a bowl or bag of rice. The rice will absorb the moisture from your device overnight and hopefully by morning your phone will be back to its old self.
How to get water out of your phone charging port
If you’re lucky, you may be able to get water out of charging port with a simple shake.
If this doesn’t work, try using a hairdryer on the lowest heat setting. Hold the hairdryer about an inch away from the charging port and move it around in a circular motion.
You can also use a can of compressed air to blow into the charging port. Be sure to hold the can upright so that the air comes out in a steady stream.
If these methods don’t work, you’ll likely need to take your phone to a professional for repairs.
How to dry your phone
If your phone has gotten wet, there are a few things you can do to try to salvage it. Time is of the essence, so the sooner you act, the better.
First, remove the SIM card and any external memory cards. This will help to prevent water damage.
Next, remove the battery if possible. If your phone is not battery-operated, skip this step.
Then, use a clean cloth to gently dab the water from your phone. Do not rub or scrub the phone, as this could cause further damage.
Once you have removed as much water as possible, turn your phone on and check for signs of damage. If the screen is cracked or damaged in any way, do not continue to use your phone as this could cause further harm.
If your phone appears to be working normally, take care when using it until it is completely dry. Moisture can remain in nooks and crannies within your phone and may cause damage if not allowed to dry completely.
What to do if your phone has water damage
If your phone has water damage, there are a few things you can do to try and salvage it.
First, make sure the phone is turned off. If it’s on, water can short-circuit the phone.
Next, remove the SIM card and any other removable parts. This will help keep them from rusting.
Then, use a vacuum cleaner with the hose attachment to suck out as much water as possible.
After that, use a hairdryer on the lowest setting to carefully dry out the phone. Make sure you hold the hairdryer at least six inches away from the phone so you don’t damage it further.
Once the phone is dry, put everything back together and crosses your fingers that it turns on. If it does, hooray! You’ve successfully saved your phone from water damage.
If you’ve followed the steps above and your phone is still wet, your best bet is to take it to a professional. They’ll have the tools and expertise to safely disassemble your phone and dry it out without damaging any of the delicate components.