Are you looking for a way to bypass Google account verification after reset? If so, you’ve come to the right place. In this blog post, we’ll show you how to bypass Google account verification without PC.
Table of Contents
How to bypass Google account verification after reset without PC
If you’ve reset your phone and you’re being asked to verify your Google account, there are a few ways you can bypass that verification. Here’s how:
- On the “Verify your account” screen, tap on the “I don’t have a phone number” link.
- Enter your email address and tap on “continue.”
- On the next screen, tap on the “send code” link.
- A message will be sent to your email address with a verification code. Enter that code on the next screen and tap on “continue.”
- You should now be able to access your device without having to verify your Google account.
Why you should bypass Google account verification after reset
There are several reasons why you would want to bypass the Google account verification after a factory reset. Maybe you’ve forgotten your password, or you’ve bought a used phone that was already locked. Whatever the reason, there are several ways to bypass the Google account verification process.
One way is to use a technique called “shadow hacking.” This method uses a back door that was accidentally left open by the phone’s manufacturer. By exploit this back door, you can bypass the Google account verification process without having to reset your phone.
Another way to bypass Google account verification is to use a third-party service like FRP Bypass Tools. These services use a variety of methods to bypass the Google account verification process, and they can usually get you up and running in no time.
Finally, if you’re really in a bind, you can always try your luck with customer service. If you explain your situation and ask nicely, they may be able to help you get around the Google account verification process.
How to factory reset your Android device
If you’ve forgotten your screen lock pattern, here’s how to reset it without losing all of your data.
- Open your device’s Settings app.
- Tap Accounts. If you don’t see “Accounts,” tap Users & accounts.
- If you have more than one account on your device, tap the one you want to remove.
- Tap Remove account. If this option is unavailable or you don’t see it, it might not be possible to remove the account from your device without performing a factory reset.
- Press the Power button to restart your device.
How to wipe your Android device
factory reset protection was introduced by Google in Android 5.1 Lollipop
in order to make it more difficult for thieves to factory reset a stolen device
and use it as their own. When you perform a factory reset, all data on your
device is wiped, including your Google account and any other accounts you had
set up on the device.
However, if you have forgotten your Google account details, or if you have
bought a second-hand phone that is locked to a previous owner’s account, then
you will need to bypass the FRP. In this article, we’ll show you how to do that.
How to remove your Google account from your Android device
If you’ve reset your Android device and you’re now being prompted to enter your Google account information, you may be wondering how to bypass this step. Here’s a quick guide on how to do it.
First, go to your device’s Settings menu and tap on Accounts. From here, find the Google account that you want to remove and tap on it. Then, tap on the three dots in the top-right corner and select Remove account. Confirm that you want to remove the account by tapping on Remove account again.
Once you’ve removed your Google account, you’ll no longer be prompted to enter it during the setup process.
How to flash a new ROM on your Android device
If you’ve ever wanted to experiment with a different version of Android on your phone, then you’ve probably wondered how to flash a ROM. This process can seem confusing and complicated at first, but it’s actually very easy to do once you know what you’re doing.
In this guide, we’ll show you how to flash a new ROM onto your Android device, which can be extremely useful if you’re looking to change the look and feel of your phone or if you want to try out a new version of Android before it’s officially released.
Before we begin, it’s important to note that this process will erase all of the data on your device, so be sure to back up anything that you don’t want to lose before proceeding.
- The first step is to download the ROM that you want to flash onto your device. There are a number of different places where you can find ROMs, but we recommend using XDA Developers (link below). Once you’ve found the ROM that you want, download it onto your computer.
- Next, you need to download the latest version of TWRP Recovery (link below). This is a custom recovery that will allow you to flash the new ROM onto your device. Once TWRP is downloaded, move it into the same folder as the ROM that you downloaded in Step 1.
- Now that everything is in place, it’s time to boot into Recovery Mode. To do this, first power off your device completely. Then, press and hold the Power + Volume Up buttons simultaneously until you see the recovery Mode screen appear.
- Once in Recovery Mode, use the Volume buttons to navigate through the menu and select “Install Zip from SD Card”. Then select the ZIP file for the ROM that you downloaded in Step 1. Confirm that you want to install it and wait for the process to complete.
- Once the installation is finished, select “Wipe Data/Factory Reset” from the menu and confirm that you want to do this. This step will wipe all of the data from your device, so be sure that you have everything backed up before proceeding!
How to root your Android device
Here’s a step-by-step tutorial on how to root your Android device using Windows, Mac or Linux.
- A compatible Android device
- A Windows, Mac or Linux computer
- A USB cable
- On your computer, download and install the Android SDK Platform Tools.
- Connect your Android device to your computer using a USB cable.
- Open a command prompt or terminal on your computer.
- Change directories to the platform-tools folder within the Android SDK folder. For example: cd /Users//Library/Android/sdk/platform-tools
- On your device, go to Settings > About phone and tap the Build number seven times to enable Developer options.
- Return to the previous screen and select Developer options from the menu that appears; then turn on USB debugging from the list of options.
- In the command prompt or terminal, type adb devices and press Enter . If you see a list of devices attached with some hashed numbers in front of it, congratulations! You have successfully connected your device in developer mode . Close the command prompt or terminal window now as we no longer need it for this guide .
How to install a custom recovery on your Android device
There are a number of benefits to installing a custom recovery on your Android device. A custom recovery can give you the ability to install custom ROMs, kernels, themes, mods and other tweaks that can greatly improve the performance, look and feel of your device. A custom recovery can also be used to backup and restore your device’s data, making it a valuable tool for anyone who likes to tinker with their phone or tablet.
Installing a custom recovery on your Android device is not particularly difficult, but there are a few things you will need to do before you can get started. First, you will need to unlock the bootloader on your device. This will void your warranty, so make sure you know what you’re doing before proceeding. Second, you will need to install the Android SDK on your computer (this is only necessary if you are going to be using the ADB method to install the custom recovery). Finally, you will need to download the Recovery Flasher tool and the appropriate custom recovery image for your device.
Once you have all of the necessary files downloaded and your Android SDK installed, you are ready to begin. To install a custom recovery using the Recovery Flasher tool, simply launch the tool and follow the on-screen instructions. If you prefer to use ADB, then connect your device to your computer via USB and enter the following commands:
adb reboot bootloader
fastboot flash recovery .img