Skip to contentSkip to sidebarSkip to footer

Television Picture Quality

Picture quality is a very important aspect of a TV and one can’t compromise with it. Learn how to improve television picture quality.

Are you still grumbling over your picture quality? Sometimes what we see in the shop differs greatly from what we see at home. Well it is time you need to try on some other tricks, to improve your picture quality.

Certain factors determine the picture quality of your television. Some of them can be controlled where as others may not be in your hand, to control. The reasons that are responsible for poor signals may be weather. Sometimes bad weather can stop your TV from getting the signals at all. Also if, one person is staying in remote areas, the picture quality will surely get decreased since the impulses have to be carried over a long distance.

But here are some factors that we may bring a change about-

Digital TV Replace with Good Cables

Your TV must be connected to the source-set top box, DVD player, Blu-ray- with HDMI cables. Often for older models component cable can deliver HD signals also. If you are using the composite yellow cable, then you must know that you are definitely not getting high definition for your picture. So get the old cables replaced by the newer inexpensive HDMI cables.

Improve your Source

As soon as you get an HDTV, you just shift to a high definition server too! Simply buying the advice will not give you that clarity of picture. You will have to pay some money extra for upgrading to HD, and this service is allowed in all leading companies of satellite TV.

Sky tv packages offer you stunning quality of the picture in HD with the features of recording, pausing and rewinding live TV. Again Blu-ray offers six times more clarity than the DVD resolution. Even the best DVD player cannot compete with the basic Blu-Ray models.

Check the Resolution Settings

After doing the following improvements, even if your picture quality is not improved then you must realize that your source settings are not proper. The setting do not come automatically, you will have to check in for HD output usually 1080i to get the best clarity. For newer TV sets go to “aspect Ratio” to set the resolution.

Also don’t forget to check the correct channel while viewing for most satellite TVs has separate HD channels. While using a DVD player, check the aspect ratio to 16×9 for the best picture quality. Usually it is 4×3 and when you improve it to 16×9 you will notice that the black bards have considerably decreased.

Check the Settings of your Television Set

Your television set has to be tuned and correctly set so that it looks the best. The contrast, the brightness, the sharpness, all contributes a lit to the clarity of picture. Also, the modes Vivid and Sports are such that they can make pictures lose their finesse. Cinema mode or movie mode is the most preferable to view D clarity of picture. If you really want to improve drastically several Blu-ray setups are available, and you could choose one from them.

Certain advance setting options like color temperature can bring a little more improvement to your picture quality but this need a proper calibrator to do so.

Use Signal Amplifiers

If you are sure that the signals reaching you are not adequate, then you can amplify them using a signal amplifier. A preamplifier is put on the antenna so that the signals captured are strongest.

Digital TV picture quality is far better than the analogue TV picture quality, but you either have very clear picture or no picture at all!

This Pop-up Is Included in the Theme
Best Choice for Creatives
Purchase Now