Skip to content Skip to sidebar Skip to footer

How to Program a Philips Universal Remote

The modern home is full of gadgets and entertainment devices. This could mean a clutter of remote controls, each dedicated to a single device. Fortunately, there’s a solution: a universal remote. The Philips Universal Remote can replace a multitude of other remotes, making your entertainment center much more streamlined. Today, we’re going to delve into “How to Program a Philips Universal Remote”.


Universal remotes, like the Philips Universal Remote, are designed to operate multiple devices, saving you from the hassle of juggling between remotes. But before it can work magic in your living room, you’ll need to set it up. Wondering how to program a Philips Universal Remote? Don’t worry; we’ve got you covered!

The Basics

Before we delve deep into “How to Program a Philips Universal Remote,” you need to ensure that you have:

  • The Philips Universal Remote itself.
  • The devices you want to control (e.g., TV, DVD player, cable box, etc.).
  • The list of codes provided with your Philips Universal Remote or the manual (you can also find them online).

Manual Programming

How to Program a Philips Universal Remote using manual code entry:

  1. Turn On the Device: Begin by turning on the device you want to control.
  2. Press and Hold the Setup Button: On your Philips Universal Remote, press and hold the “Setup” button until the red indicator stays on.
  3. Enter the Code: Using the number pad, enter the 3 or 4 digit code associated with your device. The red indicator will turn off if the code is entered correctly.
  4. Test the Device: Point your remote towards the device and press the “Power” button. If the device turns off, you’ve successfully programmed your Philips Universal Remote!

If your device doesn’t turn off, you may need to try other codes for your device brand until you find the correct one.

Automatic Code Search

If you’re unsure about the correct code or if manual programming sounds too tedious, here’s another guide on how to program a Philips Universal Remote using the automatic code search:

  1. Turn On the Device: This step remains consistent. Ensure the device you wish to control is turned on.
  2. Hold the Setup Button: Press and hold the “Setup” button.
  3. Press the Device Button: Press and release the desired device button on the remote (e.g., TV, DVD, CBL, and SAT). The red indicator will blink once and remain on.
  4. Point and Press the Power Button: Point the remote at the device and press the “Power” button. If the device turns off, release the power button and the setup process is complete!

If not, keep pressing the power button every few seconds until the device turns off. Each time you press the power button, the Philips Universal Remote tries a new code. When your device finally turns off, you’ve found the correct code.

Benefits of Using a Philips Universal Remote

Now that you’re familiar with how to program a Philips Universal Remote, let’s discuss the advantages:

  • Declutter: Say goodbye to multiple remotes scattered on your coffee table.
  • Ease of Use: With a single remote to control multiple devices, operations become simpler.
  • Cost-Efficient: In the event of losing or damaging a device’s original remote, instead of buying brand-specific replacements, a Philips Universal Remote is a versatile solution.


Even after learning “How to Program a Philips Universal Remote”, you may run into occasional hitches:

  • Incorrect Code: If a device isn’t responding, you might have used an incorrect code. Try repeating the programming with alternative codes.
  • Low Batteries: Ensure the batteries in your Philips Universal Remote are fresh.
  • Distance and Angle: Ensure you’re pointing your remote directly at the device, without any obstructions.


Understanding how to program a Philips Universal Remote can truly transform your entertainment experience. With just a bit of setup, this single remote can streamline your tech-driven life, making it efficient and clutter-free.

Hopefully, this guide on “How to Program a Philips Universal Remote” aids you in setting up your remote effortlessly. Embrace the convenience of modern technology and happy viewing!

This Pop-up Is Included in the Theme
Best Choice for Creatives
Purchase Now