Learn here how to enter into bootloader mode of samsung galaxy S2 skyrocket 4g I727
What is Bootloader? Bootloader is like a programming code which goes on executing every time you run the operating system. Bootloader is device specific and instructs operating system where to boot from. Android is an open source Operating system packed on different hardware, so there is always a probability of finding different class of bootloader on different types of hardware. This can be mainly attributed to the fact that manufacturers tends to keep users on a particular android platform for which they have specially designed the device. This is done to insure security for their Operating system…
But incase if you want to install a custom ROM then bootloading is your first step. The best part about Samsung is that the procedure of rooting the Samsung phone is quite easy and is readily available on the internet. This allow users to install custom ROM and Kernets on your device in order to get rid of the unwanted stock applications, bloatware and even the sluggish interface of the OS. This also allows you to power-up the performance of your device or bypass unwanted restrictions.
Pre-Requisite for entering into bootloader of your Samsung Galaxy S II Skyrocket 4G i727
- First you should disable all security programs from your android device and your PC. Security programs may interfere with the working of the program
- Keep your device’s battery fully charged or at least at 80% so, that its battery doesn’t drain out in the middle of bootloading and you break your phone.
- Make backup for everything on your device such as Videos, photos, songs, SMS, contacts etc. Bootloading may result into loss of your precious data so, it is advisable to make a backup of all your vital data before proceeding.
Steps to be followed while rooting your Samsung Galaxy S II Skyrocket 4G i727
Please go through the following steps carefully to enter into bootloader mode of your Samsung Galaxy S2 Skyrocket 4G i727.
Step 1
At first hold the volume down button of your device
Step 2
Now press the power button but make sure that you keep on pressing both the buttons simultaneously i.e. at the same time.
Step 3
Now wait for a few seconds until your device’s screen turns fully black.
Step 4
Once the display of the device has turned in to black, release the power button but keep on continuously pressing the volume down button.
Step 5
In couple of seconds your device will not start booting into the bootloader. Now you are done and you will be presented with the bootloader menu where you will be able to see different options.